9
RF Evaluation
•
This section describes the steps required to evaluate the TRF6901 device on a
stand-alone .
•
Hardware required:
–
1 MSP-US-TRF6901 (or MSP-EU-TRF6901) EVM kit
–
1 PCs equipped with 1 parallel port
–
1 Spectrum Analyzer
–
1 Signal generator (or another EVM)
–
1 Oscilloscope
–
1 Power Supply
•
Setup Hardware:
–
Configure the EVM kit according to the figure on
page 5
–
Assemble the test setup (more information on
page 10
)
–
Review proper hardware and jumper setups in the EVM User’s Guide section 2.8.1.
•
Setup Software:
–
Download the software from the internet at
http://www-s.ti.com/sc/techzip/slwc026.zip
–
Install the software on the PC. Check out 2 screen snap-shots on
page 11
–
More information available on how to install and run the software on the EVM User’s
Guide section 3
