4
Link demonstration
•
This section describes the steps required to set up a quick demonstration that
will enable you to send text from one PC to another PC using a wireless link at
32 kbps.
•
Hardware required:
–
2 MSP-US-TRF6901 (or MSP-EU-TRF6901) EVM kits
–
4 antennas (
See pg. 13 for how to choose an antenna
)
–
2 PCs each equipped with 1 serial port
–
2 Power Supplies
•
Setup Hardware:
–
Setup the 2 PCs wherever you want to demonstrate the RF link.
–
Assemble each ‘station’ according to the figure on
page 5
–
Review proper hardware and jumper setups in the EVM User’s Guide section 6.2.2.
•
Setup Software:
–
Download the file TRF6900 Demo_1_16.exe from the CD provided with the EVM kit
located under the following directory:
\MS-RF Chipset\Tools_Software\Setup_TRF6900 demo 1_16_Master
–
Install the software on each PC. See a snap-shot on
page 6
•
Establish a bi-directional link:
–
See
page 6
to start-up the software
–
See section 7.7.5 of the EVM User’s guide for more information on how to run the
software
