10
RF Evaluation Board Setup (Tx and Rx)
Parallel
Port
Vcc
GND
Tx RF
Port
Rx RF
Port
1.
Connect the parallel port between the EVM and the PC
2.
Connect a 6 to 8 V power supply to the Vcc and Gnd pins
3.
Determine what kind of evaluation you want to work on:
•
Testing of the transmitter. A spectrum analyzer and pulse generator (for external modulation
input) are required (connected to the Tx RF port). For more details go to section 3.7 of the EVM
User’s Guide.
•
Testing of the receiver. A spectrum analyzer, pulse generator, external modulation input signal
generator or another EVM (connected to the Rx RF port), and oscilloscope are required. For
more details go to section 3.8 of the EVM User’s guide
