7
Code development
•
This section describes the steps required to use the EVM as a code
development tool and program the MSP430 uC.
•
Hardware required:
–
1 MSP-US-TRF6901 (or MSP-EU-TRF6901) EVM kit
–
1 PC equipped with 1 serial port
–
1 Power Supply
–
1 MSP-FET430P140
•
Setup Hardware:
–
Assemble the ‘station’ according to the figure on
page 5
–
Plug the ‘station’ into the MSP-FET430P140 using the JTEG interface connector
provided on the EVM board (
see page 8
)
•
Setup Software:
–
Download the MSP430 FET (Flash Emulation Tool) called ‘kickstart’ at
http://focus.ti.com/docs/tool/toolfolder.jhtml?PartNumber=MSP430FREETOOLS
–
PLEASE KEEP IN MIND that to test your hardware you will need at least 2 stations to
achieve a bi-directional link
•
Develop code for the MSP430
–
Develop code + FLASH the MSP430 according to the User manual included with the
‘kickstart’ tool set