manualshive.com logo in svg

Texas Instruments EVM430-i2040SUBMTR, User Manual, Page: 42 / 69

Share
Download
Texas Instruments EVM430-i2040SUBMTR User Manual Download Page 42

Embedded Metering Library API

www.ti.com

5.5.3.1.5 int16_t get_temperature_slope (void)

Get the calibration value of the temperature slope

Parameter: none

Return: The calibrated ADC reading increment per 0.1 degree Celsius in calibration parameter memory

5.5.3.1.6 void set_temperature_parameters (int16_t temperature_at_calibration, int16_t

temperature_sensor_intercept, int16_t temperature_sensor_slope)

Write temperature related calibration value into calibration parameter memory

Parameter:

•

temperature_at_calibration : the temperature in 0.1 degree Celsius which the calibration is done.

•

temperature_sensor_intercept : the ADC reading at calibration temperature.

•

temperature_sensor_slope : the ADC reading increment per 0.1 degree Celsius.

Return: none

5.5.3.1.7 calibration_scaling_factor_t get_P_scaling (int phx)

Get power scaling factor of phase phx

Parameter: phx = 1

Return: Power scaling factor in calibration parameter memory (see metrology-types.h for type definition of
calibration_scaling_factor_t

5.5.3.1.8 void set_P_scaling (int phx, calibration_scaling_factor_t value)

Write power scaling factor of phase phx with value

Parameter:

•

phx = 1

•

value = the value to be written to power scaling factor in calibration parameter memory

Return: none

5.5.3.1.9 calibration_scaling_factor_t get_V_rms_scaling (int phx)

Get the voltage scaling factor of phase phx

Parameter: phx = 1

Return: Voltage scaling factor in calibration parameter memory (see metrology-types.h for type definition
of calibration_scaling_factor_t)

5.5.3.1.10 void set_V_rms_scaling (int phx, calibration_scaling_factor_t value)

Write the voltage scaling factor of phase phx with value

Parameter:

•

phx = 1

•

value = the value to be written to voltage scaling factor in calibration parameter memory

Return: none

5.5.3.1.11 int16_t get_v_dc_estimate (int phx)

Get the active (dynamic) voltage channel ADC dc offset of phase phx

Parameter: phx = 1

Return: the dynamic voltage channel dc offset, in ADC counts, of phase phx

42

Firmware and Embedded Metering Library API

SLAU587 – August 2014

Submit Documentation Feedback

Copyright © 2014, Texas Instruments Incorporated

Summary of Contents for EVM430-i2040SUBMTR






































































Reviews:

No comments