The software should start with only
DS90UB95x
in the
Devices
drop-down menu. If there are more devices then
the software is most likely in demo mode. When the ALP is operating in demo mode there is a
(Demo Mode)
indication in the lower left of the application status bar as shown below.
Figure 3-22. ALP in Demo Mode
Disable the demo mode by selecting the
Preferences
drop-down menu and unchecking
Enable Demo Mode
.
Figure 3-23. ALP Preferences Menu
After demo mode is disabled, the ALP software will poll the ALP hardware. The ALP software will update and
have only
DS90UB95x
under the
Devices
drop-down menu.
Troubleshooting
SNLU224C – SEPTEMBER 2017 – REVISED APRIL 2021
DS90UB95x-Q1 Serializer Evaluation Module
25
Copyright © 2021 Texas Instruments Incorporated
