![background image](http://html.mh-extra.com/html/texas-instruments/ds16ev5110/ds16ev5110_operators-manual_1097135011.webp)
Input
Termination
Equalizer
Limiting
Amplifier
DC Offset Correction
Data Channel
(0-2)
Boost Setting
3
3
3
BST_0 : BST_2
BST
CNTL
EN
EN
EN
FEB
SMBus Reg.
REG3[7],
REG4[7],
REG4[3]
EN
SMBus Register
D_OUT+
D_OUT-
D_IN+
D_IN-
SMBus Reg.
REG7[0]
SNLS249M – FEBRUARY 2007 – REVISED APRIL 2013
CLOCK CHANNEL
The clock channel incorporates a limiting amplifier, a DC offset correction, and a TMDS driver as shown in
.
CLOCK CHANNEL SIGNAL DETECT
The DS16EV5110 features a signal detect circuit on the clock channel. The status of the clock signal can be
determined by either reading the Signal Detect bit (SD) in the SMBus registers (see
) or by the state of
the SD pin. A logic High indicates the presence of a signal that has exceeded a specified threshold value (called
SD_ON). A logic Low means that the clock signal has fallen below a threshold value (called SD_OFF). These
values are programmed via the SMBus (
). If not programmed via the SMBus, the thresholds take on the
default values for the SD_OFF and SD_ON values as indicated in
. The Signal Detect threshold values
can be changed through the SMBus. All threshold values specified are DC peak-to-peak differential signals
(positive signal minus negative signal) at the input of the device.
Table 4. Clock Channel Signal Detect Threshold
Values
Bit 1
Bit 0
SD_OFF Threshold
SD_ON Threshold
Register 06 (mV)
Register 05 (mV)
0
0
40 (Default)
70 (Default)
0
1
30
55
1
0
55
90
1
1
45
75
Figure 3. DS16EV5110 Data Channel
Copyright © 2007–2013, Texas Instruments Incorporated
11
Product Folder Links: