3
WARNING
This EVM is meant to be operated in a lab environment only and is not
considered by TI to be a finished end-product fit for general consumer use
This EVM must be used only by qualified engineers and technicians familiar
with risks associated with handling high voltage electrical and
mechanical components, systems and subsystems.
This equipment operates at voltages and currents that can result in electrical shock, fire
hazard and/or personal injury if not properly handled or applied. Equipment must be used
with necessary caution and appropriate safeguards employed to avoid personal injury or
property damage.
It is the user’s responsibility to confirm that the voltages and isolation requirements are
identified and understood, prior to energizing the board and or simulation. When
energized, the EVM or components connected to the EVM should not be touched.