Texas Instruments DM6467, User Manual

Page: 26 / 78

Installation Overview
2-8
(Max: 51)
RateCtrlQpMin = 10 # Qp range min for Rate Control
(Min: 0)
NumRowsInSlice = 0 # Number of rows in a Slice
(0..Max no. of rows in the frame)
sliceMode = 2 # 0 = No slice 2 = Slice based on
packet size
sliceUnitSize = 1500 # Maximum size of the slice to be
encoded
AdaptiveIntraRefresh = 0 # Disabled => 0
InputContentType = 0 #PROGRESSIVE = 0 INTERLACED = 1
PicAFFFlag = 0 # PicAFF Enable Flag
InterlaceReferenceMode = 1 # 0 = Only top field Default,
1 = same parity field,
2 = most recently coded frame,
3 = Adaptive reference field
Transform8x8DisableFlag = 1 # 0 = Enabled, 1 = Disabled
Intra8x8EnableFlag = 0 # 0 = NONE, 1 = I Frame, 2 = P, 3 =
IP
Intra4x4EnableFlag = 3 # 0 = NONE, 1 = I Frame, 2 = P, 3 =
IP
ChromaConversionMode = 1 # 0 = line drop, 1 = Average
##########################################################
# Loop filter parameters
###########################################################
LoopFilterDisable = 0 # Disable loop filter in slice
header (0=Filter, 1=No Filter,
2= Disable filter
across slice boundary)
LoopFilterAlphaC0Offset = 0 # Alpha & C0 offset div. 2, {-
6, -5, ... 0, +1, .. +6}
LoopFilterBetaOffset = 0 # Beta offset div. 2, {-6, -5,
... 0, +1, .. +6}
2.6 Uninstalling the Component
To uninstall the component, delete the codec directory from your hard disk.
2.7 Evaluation Version
If you are using an evaluation version of this codec, there will be a limit of
encoding up to 54000 frames in the usage of the encoder.