Texas Instruments DM6467, User Manual

Page: 24 / 78

Installation Overview
2-6
2) Set a system environment variable named
FC_INSTALL_DIR
pointing
to <install directory>\CCStudio_v3.3\<ce_directory>\cetools.
3) Set a system environment variable named
XDAIS_INSTALL_DIR
pointing to <install
directory>\CCStudio_v3.3\<ce_directory>\cetools\packages\ti\xdais.
4) Set a system environment variable
EDMA3LLD_INSTALL_DIR
pointing
to <install
directory>\CCStudio_v3.3\<ce_directory>\cetools\packages\ti\sdo\edm
a3.
2.3.3 Installing HDVICP API
Download HDVICP Library version 1.01.017
1) Extract the HDVICP API zip file to the same location where the Code
Composer Studio is installed. For example: <install
directory>\CCStudio_v3.3.
2) Set a system environment variable named HDVICP_API pointing to
<install
directory>\CCStudio_v3.3\<hdvicp>\200_V_HDVICP_X_1_01\DM6467
_X_001\hdvicp_api
2.4 Building and Running the Sample Test Application
The sample test application that accompanies this codec component will
run in TI’s Code Composer Studio development environment. To build and
run the sample test application in Code Composer Studio, follow these
steps:
1) Extract the .zip file from the package.
2) Verify that you have installed TI’s Code Composer Studio version
3.3.49 and code generation tools version 6.0.8. Start the Code
Composer Studio to view the Parallel Debug Manager (PDM) window.
3) In the PDM window, open the window by double clicking on ARM926,
load the GEL file davincihd_arm.gel and click Debug > Connect .
4) In the PDM window, open the window by double clicking on
C6400PLUS, load the GEL file davincihd_dsp.gel and click
Debug > Connect .
5) Open the test application project file – testh264encoderapp.pjt – in
C6400PLUS window. This file is available in the \Client\Build sub-
directory.
6) Select Project > Build to build the sample test application. This
creates an executable file, TestEncoderApp.out in the \Client\Build\Out
sub-directory.
7) Select File > Load , browse to the \Client\Build\Out sub-directory,
select the codec executable created in step 6, and load it into Code
Composer Studio in preparation for execution.