Texas Instruments DLP5532HBQ1EVM, User Manual, Page: 8 / 21

1.2 Specifications
1.2.1 Electrical Specifications
Table 1-7. Electrical Specifications
Parameter MIN NOM MAX UNIT
Input
Voltage 8 12 18 V
Power
(1)
30 80 W
LED Pre-Regulator Output
Voltage 17 V
Illumination Driver Output Load
Voltage
(Per LED Color Output)
17 V
Current
(Per LED Color Output)
10 A
Temperature
Operating DMD Temperature
(2)
–40 105
(3)
°C
(1) Conditions for maximum power: white balanced LED current up to 10 A, LED forward voltage =
12.3 V, display duty cycle = 90/10.
(2) Care must be taken to ensure that individual components and PCB do not exceed their maximum
temperature when driving high-power load.
(3) Some components are only rated to 85°C. Refer to Table 1-8 for a list of these components.
1.2.2 Component Temperature Ratings
The PCB materials and most of the PCB components are rated to operate between –40°C to 105°C, including
the DLP5530-Q1, the DLPC230-Q1, and the TPS99000-Q1.
Some components on board, such as switches, connectors, and indicator LEDs, do not meet this temperature
rating. The specifications for EVM components which are not rated between –40°C to 105°C are listed in
Table
1-8 . Please refer to the EVM bill of materials to review the temperature specifications of all components used in
the EVM design.
Table 1-8. EVM Components Which are Not Rated for –40°C to 105°C
Board Reference Part Number Manufacturer Description
Temperature
Minimum (°C)
Temperature
Maximum (°C)
Controller D4, D5 LTST-C171KGKT Lite-On LED, GREEN 0805 –55 85
Controller D6 LTST-C171KRKT Lite-On LED, RED 0805 –55 85
Controller J3 685119248123 Wurth
CONN MICRO HDMI
RIGHT ANGLE
–40 85
Controller SW2 CVS-03TB Copal Electronics Inc
SWITCH DIP SLIDE 3-POS
1 MM 6 V
–40 85
Controller SW1,SW3 CVS-01TB Copal Electronics Inc
SWITCH DIP SLIDE 1-POS
1 MM 6 V
–40 85
Controller SW4 GT12MSCBE C&K Comp SWITCH, SPST, GULL –30 85
Controller
U5, U7, U10,
U503, U504
PCMF2HDMI2SZ Nexperia
COMMON MODE CHOKE
4LN SMD ESD
–40 85
Controller U501 TFP401AIPZPRQ1 Texas Instruments
IC PANELBUS DVI RCVR
100-HTQFP
–40 85
The controller and illumination driver PCBs have a UL flame rating of 130°C maximum.
This is not a production design. It is intended for evaluation only.
User Guide Overview www.ti.com
8 DLP5532HBQ1EVM Evaluation Module DLPU108 – MAY 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated