Texas Instruments DLP5532HBQ1EVM, User Manual, Page: 13 / 21

2.2 Software Installation
1. Download and install the DLPC230-Q1 Control Program Lite from TI.com.
2. Install Total Phase Cheetah USB Adapter Drivers from the Total Phase website.
2.3 Powering-Up EVM
1. Connect input power cable to a power supply that meets input power specifications defined in Table 1-7 . The
red wire is the V+ terminal and black wire is the V– terminal.
2. Turn on the supply power. After powered up, a controller PCB LED indicator (D4) illuminates green.
3. Turn the PROJ_ON switch (SW4) ON. The ON position is away from the board, and OFF is toward the
board. A controller PCB LED indicator (D5) illuminates green.
2.4 Connecting EVM to the DLPC230-Q1 Control Program
1. Start the DLPC230-Q1 Control Program Lite.
2. On the connection page, set the DLPC230-Q1 Host to SPI and select the Cheetah from the drop-down menu
(see Figure 2-4 ). Note, the Cheetah must be connected to a computer with USB cable for it to show up in the
drop-down menu.
Figure 2-4. Connecting to the DLPC230-Q1 Using the DLPC230-Q1 Automotive Control Program
www.ti.com Quick Start
DLPU108 – MAY 2022
Submit Document Feedback
DLP5532HBQ1EVM Evaluation Module 13
Copyright © 2022 Texas Instruments Incorporated