Figure 2-2. FTDI to SPI Cable Connection
For correct orientation of the numbering of leads notice that on the SPI cable there is a notch at the top. Note
that there is some unused cables from the FTDI cable and unconnected pins on the SPI cable.
1. Connect brown wire of FTDI cable (Chip Select) to pin 9 of SPI cable.
2. Connect orange wire of FTDI cable (Clock) to pin 7 of SPI cable.
3. Connect green wire of FTDI cable (Serial In) to pin 5 of SPI cable.
4. Connect black wire of FTDI cable (Ground) to pin 2 of SPI cable.
5. Connect yellow wire of FTDI cable (Serial Out) to pin 8 of SPI cable.
Figure 2-3. FTDI to I2C Connection
It is also possible to communicate with the EVM through I2C. Note that there is some unused cables from the
FTDI cable and unused cables from the I2C cable.
1. Connect orange wire of FTDI cable (Clock) to orange wire of I2C cable.
2. Connect yellow wire of FTDI cable (Serial Out) to yellow wire of I2C cable.
3. Connect black wire of FTDI cable (Ground) to black wire of I2C cable.
4. Connect green wire of FTDI cable (Serial In) to green wire of I2C cable.
Quick Start
12
DLP5532HBQ1EVM Evaluation Module
DLPU108 – MAY 2022
Copyright © 2022 Texas Instruments Incorporated