DAC8742HEVM Software Setup
www.ti.com
6
SLAU700A – June 2017 – Revised November 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DAC8742H Evaluation Module
3
DAC8742HEVM Software Setup
This section provides the procedures for software installation.
3.1
Operating Systems for DAC8742HEVM Software
The EVM software has been tested on the Microsoft
®
Windows
®
XP and Windows 7 operating systems
with the United States and European regional settings. The software should also be compatible with other
Windows operating systems.
3.2
DAC8742H Software Installation
The software is available through the EVM product folder on the TI website. Once the software is
downloaded onto the PC, navigate to the
DAC8742HEVM
folder, and run the setup.exe file, as shown in
Figure 3
. When the software is launched, an installation dialog will open, and prompt the user to select an
installation directory. If left unchanged, the software location defaults to
C:\Program Files (x86)
\DAC8742HEVM
.
Figure 3. Launching Software Setup
The software installation will automatically copy the required LabVIEW™ software files and drivers to the
local machine.
NOTE:
Verify that the USB2ANY is not connected before the software installation, as this may affect
file or driver installation.
