![background image](http://html1.mh-extra.com/html/texas-instruments/bq2404-series/bq2404-series_user-manual_1094287001.webp)
User's Guide
SLUUA77 – January 2013
1-A Single-Input, Single-Cell Li-Ion Battery Charger
This user’s guide describes the bq2404x evaluation module (EVM), how to perform a stand-alone
evaluation or interface with a host or system. The charger is designed to deliver up to 1000 mA of
continuous current to the battery output when programmed with a resistor on the ISET pin and is
programmed at the factory for ~540 mA. The USB current limit modes are selected by the ISET2 pin and
limits current to a maximum of 500 mA (logic high) or 100 mA (float or high impedance). A low on the
ISET2 pin programs the charge current using the ISET resistor.
Contents
1
Introduction
..................................................................................................................
2
2
Considerations With Evaluating the bq2404x
...........................................................................
2
3
Performance Specification Summary
.....................................................................................
2
4
Test Procedure Summary
..................................................................................................
3
4.1
Equipment
...........................................................................................................
3
4.2
Equipment Setup
...................................................................................................
3
4.3
Jumper Setup
.......................................................................................................
4
4.4
ISET, PRETERM, and TS Setup
.................................................................................
4
4.5
Procedure
...........................................................................................................
5
5
Schematic, Physical Layouts and Bill of Materials
.....................................................................
6
5.1
Schematic
...........................................................................................................
6
5.2
Physical Layouts
...................................................................................................
7
5.3
Bill of Materials
.....................................................................................................
9
List of Figures
1
Original Test Setup
........................................................................................................
3
2
Battery Emulator
...........................................................................................................
4
3
bq2404x EVM Board Schematic
..........................................................................................
6
4
bq2404x EVM Assembly Layer
...........................................................................................
7
5
bq2404x EVM Top Layer
..................................................................................................
7
6
bq2404x EVM Bottom Layer
...............................................................................................
8
1
SLUUA77 – January 2013
1-A Single-Input, Single-Cell Li-Ion Battery Charger
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated