Figure 6-19. DCA1000EVM mode side view
Please refer to
shown in the beginning of this document for the switch settings for the DCA1000 raw
ADC capture card.
6.13.1 RDIF interface for Raw ADC capture
XWRL6432 doesn’t have LVDS I/Os, mainly to reduce the overall power consumption of the SOC. However,
DCA1000 board needs LVDS signals on the clock and data interface for raw ADC capture so CMOS to LVDS
converters are used on the board as shown below. Data capture interface uses RDIF (Radar Data interface) for
transferring the data between mmWave device and DCA1000 capture card. There is no change needed in the
DCA1000 capture card for this purpose, however a new low power mmWave studio need to be used for this
purpose. Low power mmWave studio interpret the RDIF interface and provides the raw ADC data visualization
platform for further signal processing.
XWRL6432BOOST Antenna
20
IWRL6432BOOST/AWRL6432BOOST EVM: FR4-Based Low Power 60 GHz
mm-Wave Sensor EVM User Guide
Copyright © 2022 Texas Instruments Incorporated
