![background image](http://html1.mh-extra.com/html/texas-instruments/awrl6432boost/awrl6432boost_user-manual_1094148008.webp)
5 PCB Storage and Handling Recommendations:
This EVM contains components that can potentially be damaged by electrostatic discharge. Always transport
and store the EVM in its supplied ESD bag when not in use. Handle using an antistatic wristband and operate on
an antistatic work surface. For more information on proper handling, refer to SSYA010A.
5.1 PCB Storage and Handling Recommendations:
The immersion silver finish of the PCB provides a better high-frequency performance, but is also prone to
oxidation in open environment. This oxidation causes the surface around the antenna region to blacken however
mmWave Radar performance would remain intact. To avoid oxidation, the PCB should be stored in an ESD
cover and kept at a controlled room temperature with low humidity conditions. All ESD precautions must be
taken while using and handling the EVM.
5.2 Higher Power Demanding Applications:
Most of the EVM could be operated with a single USB cable itself. For higher power consumption applications
where a single USB-port cannot supply power needed, use an external 5V / 2A or higher power adaptor.
PCB Storage and Handling Recommendations:
8
IWRL6432BOOST/AWRL6432BOOST EVM: FR4-Based Low Power 60 GHz
mm-Wave Sensor EVM User Guide
Copyright © 2022 Texas Instruments Incorporated