![background image](http://html1.mh-extra.com/html/texas-instruments/ads8668/ads8668_user-manual_1095237021.webp)
ADS86xxEVM-PDK Kit Operation
7.3.2
Register Map View
All registers can be read or written by the register map view in the GUI. The register map view can be
activated by clicking the
Register Map View
button in the system block diagram view; see
. The
register map table provides a complete list of program registers present in the ADS86xx device. The user
must provide data in hexadecimal for writing registers. The user also must select the register in the
register map, provide data in the
Write Data
box, and click the
Write Register
button to write the register.
For reading a register, the user must select the register in the register map and click the
Read Register
button. All registers can be read by clicking the
Read All
button. The values for all registers can be saved
in a configuration file (.cfg) by the
Save Config
button. The saved configuration can be loaded back by
using the
Load Config
button. Changes made in the register map view are reflected in the system block
view and vice-versa. For details on the ADS86xx program registers, refer to the program register map in
the respective device data sheet.
shows the register map view.
Figure 19. Register Map View
21
SBAU245A – June 2015 – Revised July 2015
ADS86xxEVM-PDK Evaluation Module
Copyright © 2015, Texas Instruments Incorporated