GB-1
Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or transporting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country of
use and on site, the generally recognised rules on working safely and correctly must be observed as well as the accident
prevention rules of the relevant professional associations.
ENGLISH
Technical Data
This chain saw has been built in accordance with Regulation DIN EN 50144-2-13 and fulfils the requirements of the
European law on equipment safety.
Model
KSE
2100
Rated Voltage
V~
230
Nominal Frequency
Hz
50
Fuse (time lag)
A
16
Rated Output
W
2100
Nominal current
A 9,4
Guide Bar cm
35
Speed
m/sec
ca. 12
Weight
kg
4,3
Oil
ml
200
All models with automatic chain lubrication and mechanical chain brake and rundown brake.
The type designation of the chain you will find on the type plate.
Class of Protection: II/ DIN-EN 50144/ VDE 0740
Interference Suppression: according to EN-55014
Information on noise emission in accordance with the 3rd Decree on the German law on equipment safety of 18.1.1991
and the EU Guideline on machines, Appendix I, Section 1.7.4 f.
Noise emission values EN-50144-2-13: Sound Pressure Level LpA
93 dB (A)
Vibration values in accordance with EN 50144-2-13: Weighted acceleration handle max. 11 m/s2
Attention: This chain saw is only intended for cutting wood !!!
Important instructions for your personal
safety
A) General safety instructions
Attention: You run danger of injuring yourself if you
use the chain saw incorrectly. It is imperative that
you read these Operating Instructions and follow the
instructions given.
Attention:
Noise protection ! Please observe the local
regulations when operating your device.
1. Caution! : When electric tools are being used, the
following basic safety measures must be taken to
protect against electric shock, injury and risk of fire.
2. Protect yourself against electric shock. Avoid body
contact with grounded elements, e.g. pipes, radiators,
stoves, refrigerators.
3. Children and young persons under 18 may not operate
electrical chain saws, with the exception of apprentices
older than 16 under the supervision of a trained adult.
4. The chain saw may only be used by persons who have
sufficient experience.
5. Always keep these Operating Instructions together
with the chain saw.
6. Only lend or give this chain saw to persons who are
familiar with its use. Also give them these Operating
Instructions.
7. You should always be in a good physical state when
working with the chain saw. Work steadily and with
concentration. Particular concentration is necessary
towards the end of your duty.
8. Never use the chain saw while under the influence of
alcohol, medication or drugs.
B) Instructions on the use of personal protective
clothing
Working with a chain saw requires special measures with
regard to protective equipment and clothing suitable for
protecting your head, hands, feet and legs, eyes and
ears.
9. Wear close fitting clothing which cannot get caught
10. Always wear an approved and tested safety helmet
when felling trees and removing branches.
11. Always wear safety goggles or a face guard.
12. Always wear suitable protective gloves.
13. Wear ear protection to avoid damage to your hearing.
14. Wear safety boots.
15. We recommend that you wear leg guards.
Summary of Contents for KSE 2100-35
Page 2: ...2 1 2 15 1 9 16 8 7 A B 3 4 6 5 3 mm 2 4 ...
Page 40: ......
