background image

12 

 

GB Original instructions 

 
Warning symbols .......................................................... 2

 

Illustrations ...................................................................  3

 

Safety .........................................................................  12

 

Identification of the parts ............................................  13

 

Mounting .................................................................... 13

 

Cable Adjustment ....................................................... 13

 

Height Adjustment ......................................................  13

 

Operation ................................................................... 13

 

Oil change ..................................................................  14

 

Air Filter ......................................................................  14

 

Cutting bar .................................................................. 14

 

Spark plug ..................................................................  14

 

Storage and maintenance ..........................................  14

 

Warranty terms and conditions ................................... 15

 

CE Declaration of conformity ...................................... 20

 

 

Safety 
 
Setup 

 

Do not put hands or feet near or under rotating 
parts. 

 

Read this manual carefully. Make sure that you are 
familiar with the different controls, settings and 
handles of the equipment.  

 

Know how to stop the unit and ensure that you are 
familiar with emergency stop. 

 

Never allow children or people unfamiliar with 
these instructions to use the machine. Note, that 
local regulations can restrict the age of the 
operator. 

 

If you feel unwell, tired or have consumed alcohol 
or drugs, do not operate the machine. 

 

Always inspect the machine before usage Ensure 
that no parts are worn or damaged. 

 

Replace worn out or damaged elements and bolts 
in sets to preserve balance. 

 

The operator of the machine is responsible for 
people’s safety.  

 

Never use the machine near children or animals. 

 

The operator of the machine is held liable for any 
accidents or hazards to other people and their 
property. 

 

Thoroughly inspect the area, where the equipment 
is to be used, if necessary remove any  foreign 
objects.  

 

Do not refuel gasoline indoors or while the engine 
is running. 

 

Spilled gasoline is extremely flammable, never 
refuel while the engine is still hot. 

 

Wipe off any spilled gasoline before starting the 
engine. Spilled gasoline on a hot engine may 
cause a fire or explosion! 

 

Boots with non-slip soles with steel jacket is 
required. Avoid loose-fitting clothes. 

 

Operation 

 

After striking a foreign object, stop the engine 
immediately, remove the spark plug cap and 
inspect the machine thoroughly for damage. Repair 
the damage before continuing. 

 

If the machine should start to vibrate abnormally, 
stop the engine and check immediately for the 
cause. Vibration is generally a warning of damage. 

 

Always turn off the engine and ensure that all 
moving parts have come to a complete stop before 
making any repairs, adjustments, or inspections.  

 

Exercise extreme caution when operating on 
slopes.  

 

Never operate the machine at a fast pace.  

 

Do not overload machine capacity by attempting to 
push at too fast a rate. 

 

Do not carry passengers. 

 

Never allow any bystanders in front of unit. 

 

Only operate the machine at daylight or in fully 
illuminated areas.  

 

Ensure a stable foothold and always keep a firm 
hold on the handles. Always walk, never run. 

 

Do not operate the machine when barefoot or 
wearing sandals. 

 

Exercise extreme caution when changing direction 
on slopes  

 

Never attempt to make any adjustments, while the 
engine is running. 

 

Use extreme caution when reversing or pulling the 
machine backwards 

 

Never operate the engine indoor or in areas with 
low ventilation. The exhaustion from the engine 
contains carbon monoxide. Failure to observe 
could result in permanent injury or death. 

 

Due to vibrations from the handle, long time use 
can result in white fingers. 
If fatigue is felt in arms, hands or fingers – or visible 
signs of white fingers is appearing, the work should 
be stopped immediately and a sufficient time of 
break should be taken for recovery. To avoid white 
fingers, each user should operate the machine for 
no more than 1.5 hours per day. 

 

Gasoline safety 

 

Use extreme care in handling gasoline.  

 

Gasoline is extremely flammable and the fumes are 
explosive.Serious personal injury can occur, when 
gasoline is spilled on yourself or your clothes. 
Rinse your skin and change clothes immediately! 

 

Use only an approved gasoline container. Do not 
use soft drink bottle or similar! 

 

Extinguish all cigarettes, cigars, pipes and other 
sources of ignition. 

 

Never refuel your machine indoors. 

 

Let the engine cool down before refilling 

 

Never fill the fuel tank to more than 2.5 cm below 
filler in order to provide space for fuel to expansion. 

 

After refueling, ensure that the cap tighten 
securely. 

 

Never use the lock-function on the gasoline gun, 
when refueling. 

 

Do not smoke while refueling. 

 

Never refuel gasoline inside a building or where 
gasoline fumes may get in contact with an ignition 
source.  

 

Keep gasoline and engine away from appliance, 
pilot lights, barbecues, electric appliances, power 
tools, etc. 

 
Maintenance and storage 

 

The engine shall be stopped when carrying out 
maintenance and cleaning operations, when 
changing tools and when being transported by 
means other than under its own power. 

 

Check regularly that all bolts and nuts are 
tightened. Retighten if necessary. 

 

The engine must be completely cooled before 
storing indoors or covered. 

 

If the machine unused for a period of time, please 
refer to the instructions in this manual.  

 

Maintain or replace safety and instruction labels, as 
necessary. 

Summary of Contents for CB 8700





















Reviews: