Quick Start Guide
2
Quick Start Guide
The EVM test procedure is explained in this section. Directions for obtaining a valid data capture from the
ADC14X250EVM using the TSW14J56EVM capture card are provided. This should be the starting point
for all evaluations.
2.1
Software Installation
The proper software must be installed before beginning evaluation. See the
section for
a list of the required software. The
section of this document contains links to find the software
on the TI website.
CAUTION
The software must be installed before connecting the ADC14X250EVM
and TSW14J56EVM to the computer for the first time.
2.1.1
ADC14X250 GUI Installation
The ADC14X250 GUI is used to control the ADC14X250EVM. It must be used to properly configured the
devices on the EVM:
1. Download the GUI from the TI website. The
section of this document contains a link to find
the software on the TI website.
2. Extract the files from the .zip file.
3. Run
setup.exe
and follow the installation prompts.
2.1.2
High Speed Data Converter Pro GUI Installation
High Speed Data Converter Pro
(HSDC Pro) is used to control the TSW14J56 and analyze the captured
data. See the HSDC Pro user’s guide (
) for more information.
1. Download the HSDC Pro from the TI website. The
of this document contains a link to find
the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
4
ADC14X250EVM Evaluation Module
SLAU625 – November 2015
Copyright © 2015, Texas Instruments Incorporated
