29
After Sales Support
TEL: 1300 886 649
• Select the desired outgoing message by pressing the
STOP
key
.
• Press the
key to play the outgoing message.
• Keep pressing the
x
key when the OGM is played back.
30.6 Turning Answering Machine On/Off
If the answering machine is on, the 2x7 segment LED display will light up and the machine will automatically pick
up the line after a number of rings (see “Setting number of Rings” ).
• Press the
key to switch on the answering machine. The 2x7 segment LED will be turned on.
• Press the
key again to switch off the answering machine. The 2x7 segment LED will be turned off.
NOTE: Even if the answering machine is off, the machine will automatically pick up after 10 rings in order
to enable remote activation (see “Remote Operation” ).
30.7 Setting number of Rings
The number of rings after which the answering machine will answer calls can be set from 2 – 9 and TS (Toll saver).
The standard setting is 3 rings. In Toll saver mode, the machine will answer after 5 rings if there are no new
messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine
to check your messages remotely (See “16.13 Remote Operation”), you can hang up after the 2nd ring. You do not
need to pay connection fees and you know that you do not have any new messages.
• Press the left menu key under
.
• Press the up or down key repeatedly until ‘
Ans Settings
’ is selected.
• Press
to confirm.
• Press the up or down key repeatedly until ‘Answer Delay’ is selected
• Press
to confirm.
• Select the amount of rings (2-9 or Toll saver).
• Press
to confirm your selection or press
to leave the menu.
30.8 Programming the VIP Code
The VIP code is a 3 - digit code used to operate the machine remotely (see Remote Operation).
