Tevion UR4200, Instruction Manual, Page: 7 / 28

After Sales Support TEL: 1300 663 907 After Sales Support TEL: 1300 663 907
21 6
1. On/Standby button
2. Source device selection buttons (TV, STB, CBL, AUDIO,
PC, VCR, DVD, CD, DVR, AUX) *
3. Numeric keys (0 to 9)
4. Toggle button for one or two-digit input
5. Red function button
6. Green function button
7. Mute button (MUTE)
8. Four-way directional control ( , , , )
9. Information button (INFO)
10. Increase audio volume (VOL+)
11. Reduce audio volume (VOL-)
12. Player controls (for DVD, VCR, etc.):
Skip backward
Recording
Pause
Skip forward
Rewind
Stop
Play
Fast forward
13. Picture-in-Picture (PIP)
14. Favourites (FAV) *
15. Swap between main and secondary PIP window (SWAP)
16. Input selection (INPUT)
17. Keypad illumination *
18. Last programme (RECALL)
19. Blue function button
20. Yellow function button
21. Programming (SET) *
22. Confirmation (OK)
23. Exit the menu (EXIT) *
24. Next channel (CH+)
25. Previous channel (CH-)
26. Menu button (MENU)
27. Electronic Program Guide (GUIDE)
28. Macro programming (MACRO) *
29. Sleep timer (SLEEP)
30. Aspect ratio (ASPECT)
31. Videotext (TTX/MX)
*not programmable
Favourites
This function lets you program up to 15 channels from any
channel presets of your receivers (TV or STB) and easily
recall them.
Programming Favourites
This function supports the source device buttons
TV and STB only. It is also possible to program
favourites on the AUX button, but this will have to
be configured first for TV or STB mode.
1. Press the source device selection button (2) of the device
for which you want to add one or more favourites.
2. Press and hold the SET button (21) for at least 3 seconds.
The display shows [CODE SETUP]. Then release the
SET button (21).
3. Press (8) four times. The display shows [FAV CH].
4. Press the OK button (22). The display shows [SETUP].
5. Press the OK button (22) again. The display shows
[FAV-CH01].
If necessary, press the or (8) button to select
another sequential number to save your favourite.
You can use the presets FAV-CH01 to FAV-CH015
for saving.
6. Press the OK button (22). The display shows [SELECT KEY].
7. Next use the numeric buttons (3) to assign the presets of
the different devices. Enter the preset channel exactly as
you would do for normal operation.
If the preset requires more than one digit, use
the toggle button (4) (depends on the target
device operation).
8. Press the OK button (22). The message [SUCCESS] will
appear for a few seconds on the display. The device will
switch to the enter mode for the next favourite,
for example [FAVCH02].
9. Continue programming the next favourite, or quit the
process by pressing the EXIT button (23) three times.
Using Favourites
To use a programmed favourite, press the FAV button (14).
Pressing the FAV button (14) multiple times will cycle through
all available preset favourites.