After Sales Support
TEL: 1300 886 649
8
Front panel
1. STANDBY key - Switches between Operational and Standby modes.
2. Numerical LED display - Shows channel selected, Load status etc.
Power LED, green - Indicates power supply active.
Signal Lock LED, orange - No Light = No Signal = No Pictures and Sound.
3 & 6. Volume adjustment.
4 & 7. CH+/- key. Channel selection.
5. Operation confirmation.
8. Menu entry.
Rear panel
1. AUDIO OPT DIG: Audio Optical Digital output, 1 x Toslink.
2. ANT IN: Connect to your external aerial, essential for stable pictures.
3. RS 232: for software upgrade, 1 x DB9.
4. ANT OUT: Antenna RF output, for another receiver or 75
Ω
terminator.
5. HDMI: Combined digital video and audio output.
6. Component Video: Y/Pb/Pr outputs, 3 x RCA.
7. AUDIO R/L: signal outputs, 2 x RCA.
8. CVBS: composite video signal output, 1 x RCA.
9. Mains power connection : IEC C7 figure 8.