After Sales Support
TEL: 1300 886 649
13
1. Basic set up- composite video
Uses the single Yellow RCA Video connector for Composite Video (CVBS) with the
Red and White RCA AUDIO R & L connectors at the back of your receiver. All video
outputs are active.
1. 1. Prepare your equipment
Ensure that the power leads to both the TV monitor and the Set Top Box are
unplugged whilst making AV connections.
Make sure that your TV monitor has Composite or CVBS video input.
1.2. Connecting Video and Audio
Video
Connect the yellow CVBS Composite Video output from your receiver to
the Composite Video input of the TV or monitor.
Audio
a) Connect the Red and White AUDIO L&R output from your receiver to 2 x RCA
leads.
b) Connect the other end of each RCA lead to the corresponding Audio input
connectors on your television monitor.
1.3. Connect the antenna
…
To the “ANTENNA IN” connection on the rear of your receiver.
1.4. Connect mains power
…
To the back of your receiver using the IEC C7 figure 8 power lead supplied.
You are now ready for GETTING STARTED.
