• Impaq
®
3000
17
Menu " Network"
Here, you select the settings for the internet
connection. When the menu is accessed, a new
menu appears initially:
Hard-wired
•
– Set network
Network test
•
– Check connection
" Network test"
The receiver performs several tests and displays the re-
spective result on the screen. You can end the tests at any
time with "Cancel".
If all tests have been performed successfully, the internet
connection is functional. Otherwise the receiver provides
notes on potential error sources on the screen.
" Hard-wired"
Once opened, the current "IP settings" are displayed
initially:
Link status:
•
"Link Up" states that a network device
is electrically linked to the receiver while with "Link
Down" no or a defective connection is displayed. Only
for the purpose of information, cannot be changed.
•
MAC address:
This is the hardware address of the
Ethernet interface, which is important when connecting
to a router. Only for the purpose of information, cannot
be changed.
IP mode:
•
"Dynamic" – The receiver automatically
requests (viaDHCPDHCP) the required settings for a
router. Recommended setting, then no other entries
are required. Prerequisite: An active DHCP server (e.g.
router) on the network.
"Manual" – The IP address and all other values have
to be set. These settings should only be made by a
qualifi ed professional. Use the number buttons on the
remote control for input.
•
IP address:
The network address for the receiver
consisting of four numbers between 0 and 255, e.g.
192.168.001.100.
Net mask:
•
With the net mask, the receiver recognises
which addresses it can access on its own network and
which can only be accessed via the gateway (router).
Consists of four numbers, each between 0 and 255,
e.g. 255.255.255.0.
•
Gateway:
Network address of the gateway (router),
which controls the connection to the internet.
Primary DNS:
•
Network address of the domain name
server, which detects the corresponding IP address for
domain names (e.g. www.teufelaudio.com). Compara-
ble with a phone book.
Secondary DNS:
•
As before, used in the event the
primary DNS fails.
To cancel, push the button
44
"Return".
To adopt the entries, select the item "Apply" and push the
select button
43
"Enter". The receiver then automatically
performs a network test (see above).
57
58
60
41
42
43
33
32
91607 GB 20101105.indd 17
91607 GB 20101105.indd 17
05.11.2010 9:56:17 Uhr
05.11.2010 9:56:17 Uhr