Teuco 382-FY, User Manual

Page: 33 / 110

33
EN
Sanitiser level OK screenshot
Insufficient sanitiser level screenshot
Insufficient water level screenshot
Insufficient water level
If the water level is insufficient, the related icon
appears and you will need to add a little water into
the bathtub to complete the sanitising process.
Insufficient sanitiser level
If the sanitiser level is insufficient or altogether
absent, the related icon appears.
Sanitiser top-up
If this is the case, fill up the dedicated tank so that
the sanitising process can begin. Remove the cap
from the tank by turning it anti-clockwise.
Fill up the tank with sanitising liquid so that the
function starts. Put the cap back on.
n.B.: Only use sanitising liquid recommended
by Teuco.
Emptying
Once 10 minutes are up, the system invites the
user to empty the bathtub by displaying the related
icon.
The sanitising treatment has finished and there is
no need to rinse the product.
The sanitising process can also be suspended
manually before the 10 minutes are up by touching
the POWER key.
To end the Sanitising process, open the drain and
empty the bathtub.
n.B.: In any case, whether sanitising is
complete or suspended, empty the bathtub
completely before using it again.
n.B.: Do not use the sanitised water for
personal hygiene or cleansing treatments.