Teucer (UK) Ltd
Head office
Bedford House, Fulham Green, Fulham High Street,
London, SW6 3JW, UK
Tel: +44 (0)20 7350 4429
Fax: +44(0)20 7228 4647
www.teucerled.co.uk
[email protected]
Logistics Centre
Trident Court,
1 Oakcroft Road,
Chessington,
Surrey, KT9 1BD, London, UK
Tel: +44(0)20 7350 4429, extension: 401
Controlling your LED strip
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
With LR-4RGBW one can adjust the brightness and colour temperature of the RGBW LED strip.
•
Choose the zone(s) you wish to control.
Select as many zones as you wish.
• Touch the colour wheel to change colours.
•
Choose one of 10 pre-set play modes.
•
Speed up or slow down the play modes.
• Adjust the colour temperature from cool
white to warm white and neutral white.
Bottom side
4.5V(3xAAA battery)
Front side
Indicator: indicate the
state of remote control
Color wheel
White channel: the 4th channel
Click to turn on/off,Press and hold
down to increase/decrease light
intensity of the W channel
Click to play / pause the 10
built-in effects, Press and hold
down to speed up/down the
running effect
Click to switch CW, NW, WW
mixed by RGB, double click to
turn off RGB channels
Press and hold down to decrease
light intensity of RGB channels
Press and hold down to increase
light intensity of RGB channels
Click to turn ON/OFF all zones
Press and hold down to save colors;
Click to recall the saved colors
Zone numbers:Click to choose
the zone/zones, Press and hold
down to turn on/off corresponding
zone
S1
S2
S3
W+
Warranty
•
Products must be installed and serviced by qualified
electrician.
•
Please ensure the receiver is mounted in a water proof
enclosure if installed in an outdoor environment,
avoiding metallic enclosures.
•
Always ensure products are mounted in areas with
adequate ventilation to avoid overheating.
•
Please ensure outputs of any power suppliers used in
conjuction with this product comply with its working
voltage.
•
Never install product whilst connected to power and
double check connections before switching on to
avoid short circuits.
Safety
Should this product fail during the 3 year warranty
period it will be replaced free of charge, subject to the
correct installation of the original product in accordance
with applicable and appropriate electrical codes and
instructions provided by Teucer, as well as subsequent
return of the faulty unit. Teucer does not accept
responsibility for any installation costs associated with
the replacement of this product and Teucer reserves the
right to alter specifications without prior notice. Teucer
can offer 5 year warranty upon request. For further
information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
LR-4RGBW and LRR-WTC
4 zone RF & WIFI controller and receiver for RGBW LED strip
