TESY CN203ZF, Usage And Storage Instructions

Page: 3 / 64

Usage and Storage Instructions
3
EN
English
•
Keep the air inlet and outlet clear of any objects:
unobstructed distance of at least 1 metre in front and
1 metre behind the panel heater should be provided.
•
The most common cause of overheating is fluff and
dust deposits in the appliance. Clean the ventilation
openings regularly with a vacuum cleaner. Before
that disconnect the power plug from the socket.
•
Never touch the appliance with damp or wet hands
– there is danger for your life!
•
The power socket must be easily accessible all the time
in case the power plug has to be disconnected as fast
as possible! Never pull the power cord or the appliance
itself in order to disconnect it from the mains.
•
ATTENTION! Outgoing air gets hot during operation
(up to more than 100°C).
•
If the power cord of this appliance gets damaged,
stop its operation and call its supplier/retailer for
advice about repair in local service centre.
•
Do not cover the appliance. If the appliance gets
covered, there is risk of overheating and fire.
•
If the appliance is damaged or does not work properly,
stop it and do not repair it yourself. For any kind of
repairs call for assistance the after-sale service centre.
This is the place where you will have your broken part
replaced with an original one. Non-adherence to this
instruction will compromise the appliance safety.
•
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains.
It is advisable all possible dangers related to the
appliance to be prevented, especially in relation to
children that may play with out-of-use appliances.
•
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
•
The appliance should not be positioned close under
power sockets!
•
Warning: Do not use this appliance with a programming
device, counter or any other device which can
automatically switch it on because if the appliance is
covered or improperly positioned this may cause fire.
•
Position the power cord in such a way that it does not
obstruct the free movement of people and can not be
stepped on! Use only approved extension cords which are
suitable for this appliance, i.e. have got a conformity sign!
•
Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
•
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
•
Never use this appliance in close proximity to wet
premises – bathroom, shower cabin or swimming pool!
PACKING
•
After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
•
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
•
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with the polyethylene bags!
INSTALLATION AND OPERATIONS INSTRUCTIONS
•
The appliance is intended only for on-floor
operation (horizontal flat surface)!
•
Before operating the panel heater you should install
its feet. The feet should be installed at the base of
the panel heater by means of 2 screws to each of
them. Make sure that the feet are properly aligned
at the two sides of the panel heater.
Position of pin
Position of holes
Fixed screw
•
Take out the set of 2x2 screws and attach the feet by
screwing the screws with a proper extra tool (screw-
driver), which is not included in appliance set.
•
Set the panel heater in proper working position
before connecting it to the mains.
•
Select a proper place for the appliance, taking into
account the safety precautions.
•
During initial operation or when the appliance has
not been used for a long period of time, subtle
odour or smoke may be emitted, it will disappear in
a short period of time during appliance operation.