EN
6
Operation and Storage Manual of Panel Heater
RESET to default settings
If the customer wants reset the convector to factory settings – by pushing the
“Mode” button
for 3 sec and select “RESET” mode
by pushing any of
the buttons:
or
. Confirm with “Mode” button
.
Visualization on Display in “RESET” settings
:
After using the reset function, the following functions will be re-set:
- clock time
- temperature correction value 0⁰C
- function Anti-frost mode is activated
- adaptive start is activated
- weekly program – 24/7 is reset.
Open window/door function
Room temperature control with open window detection - the product is
equipped with an integrated electronic device that reduces the heat output
when detects an open window or door. A sensor is used to detect eventual
drop in the room temperature. If the temperature falls more than 5˚C, the
convector will switch off by itself. Within 15 min the open window detection
should turn the appliance off. When the room temperature rises by at least
0.5°C and the difference from the initial set point is below 5°C, the convector
switches itself on with the settings already made. If the temperature does
not rise for more than 60 minutes, the convector enters Standby mode. The
function is allowed to be cancelled manually.
The function can be switched Off manually.
Deactivation of Open window/door function
:
If the customer wants to change it - by pushing the “Mode” button
for
3 sec and select “Open window” mode
by pushing any of the buttons:
or
. Confirm with “Mode”
button. User has to push
button
to reach ‘’OFF”. Confirm with “Mode”
button. In this case function “Open
window” is switched OFF.
Activation of Open window/door function
:
To return again in condition ‘’ON’’ – by pushing the “Mode” button
for
3 sec and select “Open window” mode
by pushing any of the buttons:
or
. Confirm with “Mode”
button. User has to push
button
to reach ‘’ON”. Confirm with “Mode”
button. In this case function “Open
window” is switched ON.
Note:
When the “Open window” function is enabled, the “Anti-frost” function
does not work!
Visualization on Display in “Open window” settings
:
Keyboard lock (Protection from children)
When user turns on this function, all keys of the control panel remain locked.
Hold buttons
and “Mode”
together for 3 seconds. The display should
show a message when this mode is activated. When user wants to turn off this
function has to hold the same button combination for 3 seconds.
Activation/deactivation: Holding
and “Mode”
buttons for 3 seconds
the keyboard gets locked.
To unlock the control panel, hold
and “Mode”
buttons for 3 seconds.
Visualization on Main Display when activating and deactivating the
function “Protection from children”:
Day and time – settings
First step or use after factory reset function
Set the current time and day by pushing the “Mode” button
for 3 sec and
select “DAY TIME” mode by pushing any of the buttons:
or
. Confirm
with “Mode” button
:
Set a schedule for the first day of the week
Select “DAY OF THE WEEK” mode by pushing any of the buttons:
or
.
Confirm with “Mode” button
.
Select by pushing any of the buttons:
or
reach current day of the
week (Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday) .
Confirm with “Mode” button
.
Set time
Select “TIME” mode by pushing any of the buttons:
or
. Confirm
with “Mode” button
.
The hour icon is flashing and by pushing any of the buttons:
or
reach actual hour time. Confirm with “Mode” button
. The minute icon
is flashing and by pushing any of the buttons:
or
reach actual
minute time. Confirm with “Mode” button
. (range 00.00-24.00)
Weekly program (timer) 24hours/7days
Min 300 sets of time periods
Electronic thermoregulator with weekly program (timer) 24/7 - electronic room
temperature control plus weekly timer means the product is equipped with
an electronic device, either integrated or external, which allows the product
automatically to vary its heat output over a certain time period. In relation
with a certain required level of indoor heating comfort. It allows the setting
of timing and temperature levels for a full week. During the 7-day period the
settings must allow a variation on a day-to-day basis;
Deactivation
If the customer wants to deactivate it, he/she has to push ON/OFF
button(The heater goes into “heating” mode.) or press for 1.5 sec ON/OFF
button for OFF the heater.
Activation
If the customer wants to set “Weekly shedule (timer)” mode- by pushing the
“Mode” button
for 3 sec and select “Weekly shedule”
mode by
pushing any of the buttons:
or
. Confirm with “Mode” button
.
There have three options:
- CREATE PROGRAM
- ERASE PROGRAM
- VIEW PROGRAM
Create program
