EN
4
Operation and Storage Manual of Panel Heater
. After that you should set the comfort temperature
– by pushing any of the buttons
or
set the desired temperature.
Confirm with “Mode” button
.
- The “Comfort” mode is activated.
Deactivation of „Comfort mode“
:
- To deactivate the “Comfort” mode press “On/Off” button
for 1.5 sec. Then
the heater turns off. The display will continue showing the set temperature. Or
press “Mode” button
to choose different mode.
Visualization on Display in “Comfort” mode settings
:
- Set temperature
The display shows “Comfort” in the top and the set temperature
When the convector is in „Heating mode„ ,sign „sun„
appears on the
display.
1.2. Eco mode
- with On/Off option - allows the user to set a desired
temperature when being out of home. After once set it and the function is
switched On, the appliance will keep the same room temperature each time of
usage. This temperature will be set at 18°C by default. User could also set the
time when the appliance to switch to Comfort mode.
Activation of „Eco„ mode
Push the button “Mode”
for 3 sec and select “Eco” mode
by pushing
any of the buttons:
or
and confirm with “Mode” button
. After
that you should set the temperature – by pushing any of the buttons
or
set the desired temperature. Confirm with “Mode” button
.
If you want you can set the clock time:
-Select by pushing any of the buttons:
or
reach actual hour time.
Confirm with “Mode” button
.
- The minute icon is flashing and by pushing any of the buttons:
or
reach actual minute time. Confirm with “Mode” button
(range 00.00-
24.00).
When the set time has elapse, the appliance going to Comfort mode
!
Deactivation of „Eco„ mode
- You can exit “Eco” mode
by pushing “On/Off”
button for 1.5
sec. Then the heater turns off. The display will continue showing the set
temperature. Or press “Mode”
button to choose different mode.
Visualization on Display in “Eco” mode settings
:
- Set temperature
The display shows “Eco”
in the top and the set temperature
1.3. Sleep mode
with On/Off option – two hours after activation, the
convector decreases the set temperature with -3°C under the set temperature
in Comfort mode. User could set the time range for operating in Sleep mode
then the appliance switches to Comfort mode. By default: 6 hours.
Activation of „Sleep mode„
Push the button “Mode”
for 3 sec and select “Sleep mode”
by
pushing any of the buttons:
or
, and confirm with “Mode” button
. If you want you can set the clock time: select by pushing any of the buttons:
or
, reach actual hour time. Confirm with “Mode” button. The minute
icon is flashing and by pushing any of the buttons:
or
, reach actual
minute time. Confirm with “Mode” button (range 00.00-24.00). When the set
time has elapse, the appliance going to Comfort mode!
Deactivation of “Sleep mode”
User can exit “Sleep mode”
by pushing “On/Off”
button for 1.5
sec. Then the heater turns off. The display will continue showing the set
temperature. Or press “Mode” button
to choose different mode.
Visualization on Display in “Sleep” mode settings
:
- Set temperature
The display shows “Sleep”
in the top and the set temperature
2. Basic modes
“Heating” mode
Start “Heating” mode
When the panel heater is switched-off its digital display shows
.
By pushing the ON/OFF
button for 1.5 sec the appliance goes into “Heating”
mode
. Then the display indicates
mode. The set temperature is
indicating in the right. If the room temperature is lower than the set one, the
heater will switch automatically on, and a heating sign
will appear on the
display.
The display shows
in the top and the set temperature
Deactivation of “Heating” mode
User can exit “Heating” mode by pushing “On/Off”
button for 1.5 sec. Then
the heater turns off. The display will be showing
OFF.
Temperature adjustment
By pushing any of the buttons:
or
the user enters “Temperature
adjustment” mode and the user can change the temperature settings in
the desired direction. The new settings are saved and the heater goes
automatically into “Heating” mode
. If any of
or
buttons get
pressed longer than 0.5 sec., the temperature settings will start automatically
increase or decrease at a rate of 6 units per second. The range of available
temperature settings is from 10 up to 30 degrees.
Delay start function
The delay start function allows the user to set the time at which the convector will
switch on and start heating.
Push the “Mode” button
for 3 sec and select “Delay Start”
by pushing
