manualshive.com logo in svg

TESTO 6781, Instruction Manual, Page: 65 / 76

Share
Download
TESTO 6781 Instruction Manual Download Page 65

5 Parameterizing, adjusting and analyzing software (P2A software) 

 

 

65

 

3.

Click on 

[OK]

 or 

[Cancel]

 to close the dialogue. 

- 

The analog output returns to Measuring Mode again. 

Pos: 91 /TD/Produkt verwenden/MUF 63xx/P2A/Min-/Max-Werte anzeigen 635x @ 3\mod_1242135985269_79.doc @ 32803 @ 4 @ 1 

 

5.3.3.4.

 

Displaying min./max. values 

The transmitter saves the minimum or maximum value for each 
channel (measured since the last voltage supply or since the last 
manual reset). 

✓  

The required instrument file is marked. 

1.

Click on [Test/analyze transmitter]. 

- The 

Properties of <Instrument type> <Serial number>

 

dialogue is opened with the 

Test/analyze transmitter

 register. 

2.

Mark 

Min./max. values

. 

 

Field/button  

Explanation 

Min./max. values 

View the min./max. values of each channel. 
Only the values within the measuring range 
are shown. 

Channel 

Channel 1 min./max. 

Value 

Min. or max. value, 1 decimal place. 

Unit 

Unit selected in 

Unit/analog output

. 

 

3.

Reset 

Min./max. values

. 

4.

Click on 

[Reset min./max. values]

. 

Summary of Contents for 6781













































































Reviews:

No comments