TESTO 6781 Instruction Manual Download Page 49 | Manualshive

Page: 49 / 76

TESTO 6781 Instruction Manual Download Page 49

5 Parameterizing, adjusting and analyzing software (P2A software)

49

Pos: 71 /TD/Überschriften/MUF/6.2 Erste Schritte @ 3\mod_1234258633304_79.doc @ 23970 @ 2 @ 1

5.2.

First steps

Pos: 72 /TD/Erste Schritte/MUF 63xx/P2A/Software/Treiber installieren @ 3\mod_1234261192065_79.doc @ 24123 @ 3444 @ 1

5.2.1.

Installing the software/driver

Administrator rights are required to install programs and
drivers under Windows

®

2000 SP4, XP and Vista.

5.2.1.1.

Installing P2A software

1.



Insert CD with P2A software.

✓

If the installation program does not start automatically:

> Open Windows Explorer and start the file

Setup.exe

on the

product CD.

2.



Follow the directions of the installation wizard.

5.2.1.2.

Installing USB driver

Before installing the USB driver, please read the separate
documentation that is enclosed with the USB driver CD.

5.2.1.3.

P2A software upgrade

1.



Insert product CD (supplied with the transmitter).

2.



Open Windows

®

Explorer and start the file

P2A upgrade.exe

on the product CD.

3.



Follow the directions of the installation wizard.

Pos: 73 /TD/Erste Schritte/MUF 63xx/P2A/Software starten @ 3\mod_1234261605199_79.doc @ 24142 @ 3444 @ 1

5.2.2.

Starting the software

5.2.2.1.

Starting the program

> Select:

[Start] > All Programs > Testo > P2A Software

.

-

The program window is opened (see User interface page 50).

5.2.2.2.

Establishing a connection with the instrument

The instrument works with limited functionality, if it is only
supplied via the service plug. Some settings, which can be
parameterized in the P2A software, will only be executed
by the instrument, after it has been connected to the
electric power supply.

Multiple instruments can be attached, however only one connection
is active at all times.

«
...
47
48
49
50
51
...
»

Summary of Contents for 6781













































































Reviews:

No comments