TESTO 6681 Profibus, Instruction Manual

Page: 128 / 154

128
P2A software
- 3.3 Using the software
1
Click on
[Test/analyze transmitter]
.
The Properties of <Instrument type> <Serial number> dialogue is
opened with the Test/analyze transmitter register.
2 Perform action:
Action Explanation
Carry out factory
reset:
Reset the unit, limit value and hysteresis parameters to
factory settings (see chapter 3.3.3.2 ).
Test analog
output:
Test channel 1/2/3 (optional) (see
chapter 3.3.3.3).
Test switch
outputs:
Manually switch relays 1 to 4 to test for proper function
(see chapter 3.3.3.4 ).
Min./max. values
display: Overview of the minimum and maximum values
measured since the last reset of the transmitter (see
chapter 3.3.3.5
).
3 Click on [OK] or [Cancel] to close the dialogue.
3.3.3.2 Carry out factory reset
 The required instrument file is marked.
1 Click on [Test/analyze transmitter] .
The Properties of <Instrument type> <Serial number> dialogue is
opened with the Test/analyze transmitter register.
2 Mark Transmitter test .
Current operating hours are shown.
3 Confirm control query to perform the reset.
The values are reset to the customer-specific factory settings.
4 Click on [OK] or [Cancel] to close the dialogue.