TESTO 440 Instruction Manual Download

Page: 46 / 54

4 Maintenance

In many applications, it is recommended that you recalibrate the probe
with the handle and the testo 440 once a year.

This can be carried out by Testo Industrial Services (TIS) or other
certified service providers.

Please contact Testo for further information.

4.4

Carrying out a firmware update

Information on current firmware for testo 440 can be found at
www.testo.com on the product page.



You have downloaded the firmware file to your computer.

Connect the testo 440 to your computer using the micro USB cable.





The AutoPlay window opens automatically.

Click on Open folder

[Open folder

to view files]

to view files.





The window with available file folders opens.

Drag the firmware file to the open
window.





The copying process is completed.

Disconnect the testo 440 from the computer.

Switch the testo 440 off and then on again.





The firmware is automatically installed.

Summary of Contents for 440























































Search results

Summary of Contents for 440

Reviews:

Related manuals for 440

Brands by name

Popular brands

TESTO 440, Instruction Manual

Search results

Summary of Contents for 440

Reviews:

Related manuals for 440

Brands by name

Popular brands