E.2 Probes/Sensors
E.2.1 Connecting probes/sensors
Probe ssocket:
Probe detection is carried out at the socket during the initial switch on activation
process: Probes that are required must always be connected before the measuring
instrument is switched on, or the instrument must be switched off and then on again
after a change of probe, so that the correct data can be read into the instrument.
Flue ggas ssocket:
Probe/sensor detection at the flue gas socket is carried out continuously. It is possi-
ble to change the probe/sensor even while the measuring instrument is switched on.
Connect flue gas probes/gas pressure adapters/temperature adapters
Insert the connector into the flue gas socket and
lock by turning it clockwise gently (bayonet lock).
Only one hose extension (0554 1201) should be
connected between the measuring instrument and
the flue gas probe.
Connecting other probes
Insert the connector of the probe into the probe
socket.
Connecting the pressure hose
Fit the pressure hose on the connecting nipple of
the pressure socket.
E. Operation
E.2 Probes/Sensors
18
