Input editor
1 Select the value (character):
, , , .
2 Accept the value:
.
Options:
To switch between upper-case/lower-case let-
ters:
A <=> a
(not always available).
To delete characters:
<=
.
To position the cursor in the text: Select the text
input field: ,
and position the cursor:
,
.
To delete characters in front of the cursor:
.
3 Repeat steps 1 and 2 as required.
4 Save the input:
OK Save input
.
E.4.4 Printing data
Data are printed out via the function key
. The function is only available if a print-
out is possible.
If data are to be transferred to a protocol printer via the infrared interface, the printer that
is to be used must be activated, see
Printer, p. 28.
E.4.5 Saving data
Data are saved either via the function key
or the function field
OK Save input
. The
functions are only available if saving is possible.
See also
Memory/Location, p. 23.
E.4.6 Confirming an error message
If an error occurs, an error message is shown in the display.
To confirm an error message:
.
Errors which have occurred and have not yet been rectified are shown by a warning
symbol ( ) in the header.
Error messages which have not yet been removed can be viewed in the
Inst’ diagnosis
menu, see
Instrument diagnosis, p. 25.
OK
Save
OK
Del.
OK
E. Operation
E.4 Basic operating steps
22
