G.2.10 Oil flow rate
The
Oil flow rate
function is only available if the activated fuel is an oil.
Calling up the function:
Measurements
Oil flow rate
.
Measuring:
1 Enter the flow rate:
Flow rate
Enter the value
.
2 Enter the oil pressure:
Oil pressure
Enter the value
.
- The calculated oil burner output is displayed.
3 Copy the values to the
Flue gas
menu:
OK Copy readings
.
- The
Measurements
menu is opened.
G.2.11 Leak detection
Gas is detected during leak detection; the gases are not measured.
A gas leak probe (0632 3330) must be connected.
Please refer to the documentation enclosed with the gas leak probe.
Calling up the function:
Measurements
Leak detection
.
Measuring:
Carry out the setting for the gas to be detected according to the instructions found in
the documentation for the gas leak probe.
- The gas concentration is shown in a graph (trend display).
- An alarm message is given if the alarm threshold is exceeded.
Set alarm threshold: see
Alarm limits, p. 29.
OK
OK
OK
OK
Change
OK
Change
OK
OK
G. Measuring
G.2 Measurements
42
