TESTO 0555 6383 Page 48 Instruction Manual Download

Page: 48 / 76

5 Parameterizing, adjusting and analyzing software (P2A software)

5.2.2.3.

Activating the connection with the instrument

> Click on the desired instrument file.
- The selected file is marked in colour and the connection with

the instrument is activated.

If a connection with the instrument is established when the program
is started, the corresponding instrument file is marked
automatically.

Pos: 78 /TD/Überschriften/MUF/6.3 Software verwenden @ 3\mod_1234258679599_79.docx @ 23989 @ 2 @ 1

5.3.

Using the software

Pos: 79 /TD/Produkt verwenden/MUF 63xx/P2A/Software verwenden @ 3\mod_1234262654547_79.docx @ 24162 @ 3 @ 1

5.3.1.

User interface

Menu bar:

Menu

Command

Explanation

File Open

Shows the Windows dialogue for
searching and opening files.

Save

Saves the parameters of an
instrument or parameter file
under a new name.

Edit Copy

Copies the parameters of the
marked instrument or parameter
file in the cache.

Summary of Contents for 0555 6383













































































Search results

Summary of Contents for 0555 6383

Reviews:

Related manuals for 0555 6383

Brands by name

Popular brands

TESTO 0555 6383, Instruction Manual

Search results

Summary of Contents for 0555 6383

Reviews:

Related manuals for 0555 6383

Brands by name

Popular brands