TESTO 0555 6383, Instruction Manual

Page: 37 / 76

4 Transmitter
37
9. Return to Main Menu Message with ESC .
10. Continue to Main Menu Ident with  or  or return to
Measuring Mode with ESC .
An overview of the messages can be found in Status,
warning and error messages, page 39
Pos: 58 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Ident abfragen 635x @ 3\mod_1238158282021_79.docx @ 30233 @ 4 @ 1
4.4.5.6. Calling up Main Menu Ident
1 Instrument type
2 Build number
3 Firmware
version
4 Serial number
1. In the Measuring Mode press SET , select Main Menu Ident
with

or

and confirm selection with SET .
- The type, firmware version, build number and serial number of
the transmitter are displayed.
This information is required when servicing.
2. Return to Main Menu Ident with ESC .
3. Continue to Main Menu Adjust with  or  or return to
Measuring Mode with ESC .
Pos: 59 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Abgleich bearbeiten 635x @ 3\mod_1236081643663_79.docx @ 27232 @ 455 @ 1
4.4.5.7. Editing Main Menu Adjust
For instructions on how to perform the analog adjustment see
Analog output adjustment, page 23 .
Performing analog adjustment
1. In the Measuring Mode press SET , select main menu Adjust
with

or

and confirm selection with SET .
Each channel is adjusted at three points in the analog
range (at 10 %; 50 %; 90°% of the analog scale).
2. Select Analog Adj. Ch. 1 with

or

and confirm with SET .