TESTING 1.0205, Operating Instructions Manual

Page: 5 / 58

Laboratory mortar mixer
1.0205
5
1. Reception, transport
1.1 Reception
Check the visible external condition of the delivered shipment. If the condition is correct,
the shipment can be accepted by the carrier (parcel service or freight forwarder).
If there is no objection or any transport damages detected, the completeness of the ship-
ment must be checked against the delivery note.
If any transport damages occur after a successful acceptance, a production log with an
exact report and a photo about the extent of the damage must be immediately prepared.
Please send us the production log immediately by fax. Absolutely no changes may be
made to the delivered shipment.
On the basis of this production log, we should be able to assess whether the damage can
be remedied
- by the delivery of spare parts or
- by sending a skilled technician or only
- by returning the device.
1.2 Transport
The mortar mixer is supplied in suitable cardboard packaging, standing on a pallet.
The weight of the mortar mixer is approx. 62 kg.
The mortar mixer can be moved to its intended location in the delivery packaging, by
means of a pallet truck or other suitable floor-level conveyors that must be able to reach
under the pallet.
Wrapping with ropes or similar lifting gear is only permissible if it is ensured that no lateral
forces are exerted on the packaging and therefore also possibly on parts of the mortar
mixer.
1.3 Removing the transport packaging
To remove the transport packaging, proceed as follows:

Open the lid of the transport packaging

Remove the cardboard or polystyrene transport protection (inserts)

Side panels should be cut open at the vertical edges

Cut side panels at the horizontal bottom edges