TESTING 1.0205, Operating Instructions Manual

Page: 27 / 58

Laboratory mortar mixer
1.0205
27
9.6 Setting the language
A selection of different languages is possible via the service menu, as described
below.
After switching on the mortar mixer with the main switch (see point 9.1), retrieve
the service menu by pressing
F1 .
F1 has been pressed
Service menu
Display after pressing F1 Description
F6

In order to choose an operator language
in the service menu, press F6 .
Display after pressing F6 Description
Use the appropriate function key to select the desired op-
erator language.
Go back to the service menu with
F4 , then press F4
again to enter the working menu.
If the desired language is not available, scroll to
F8 .
Display after pressing F8 Description
Use the appropriate function key to select the desired op-
erator language.
Go back to the service menu by pressing
F4 twice, then
press F4 again to enter the operating menu.