Tesmec AFB506, Handbook

Page: 17 / 154

PULLER-TENSIONER
Model: AFB506
Manual: MI-AFB506-149-00-GB Date: 05.10.2016 Author: B. Ghezzi Page: 14 of 37
4. HOUR COUNTER PAGE
This page shows the working hour of the
diesel engine in the center and 4 percentage
check icons on the edges:
diesel engine rpm
hydraulic oil temperature
diesel engine torque output
diesel engine fuel level
Switch from one page to the other one by using the up (

) or down (

) key
4.6 MACHINE START-UP
After the set-up of the machine, operate from the control panel (table 1) for the start-up.
a. completely open the valves (table 1, pos. 24-26-28).
b. insert and turn the ignition key (table 1, pos. 17) in "1" position
c. therefore, wait till the pre heating glow plugs lights turn off (table 1,
pos. 3).
d. turn the ignition key in start position. Once the engine is started,
release the ignition key.
e. The engine rpm can be regulated using the accelerator (table 1, pos.
18) and can be read on the proper display page on the electronic
multi-function display as described before