![background image](http://html1.mh-extra.com/html/tesla/wt8c90m/wt8c90m_user-manual_1091282009.webp)
9
ENG
Other Functions
Instructions of the [Delay] function
This function is used for delaying clothes drying time within 24 hours. The delay time means the program will
start after x hours. When the delay program starts, the time starts to decrease on the display and the delay
icon blinks.
Steps in details:
1. Load your laundry and make sure the machine door is closed.
2. Press the [On/Off] button, then to turn the program selector knob and select a desired program.
3. You can select the [Anti-Crease] or [Signal] functions according to your need.
4. To press the [Delay] key.
5. Continue to press the [Delay] to select the delay time.
6. After the [Start/Pause] key is pushed, the Dryer is at the run condition. The drying procedure will be
automatically performed when the delay time is over.
7. If you push the [Start/Pause] button again, the delay function will be paused.
8. If you want to cancel the “Delay” function, please press the [On/Off] button.
Instructions of the [Time] function
When the warm or cool or refresh program is selected, the [Time] button can be used to adjust the drying
time in 10 min. steps.
Instructions of the [Intensity] function
Used to adjust the dryness level of the laundry. The level has four grades . The drying time increases 3
minutes in every grade.
1. The intensity function can be activated only before the program start.
2. Press the [Intensity]button repeatedly to select the drying time.
3. Except the [Cotton Iron] [Qucik] [Synthetic Iron] [Baby Care] [Warm] [Cool] [Refresh],all the other
programs can be the[Intensity] function.
Instructions of the [Speed dry]
Use to curtail shorten the drying time, the [Cotton Extra] [Cotton Standard] [Bed linen] [Jean] program can be
set the function.
Instructions of the[Signal]function
Set up the buzzer on or off. In the general condition, the buzzer is on. Please press it if needed. When the
buzzer on:
1. The dryer will give the leading sound if press the extra function buttons.
2. If the dryer is running, rotate the function choosing knob, the dryer will remind the operator it is an
invalid choice.
3. When the drying program is end, the buzzer will also remind the user
Instructions of the[Anti-Crease]function
At the end of the drying cycle, the anti-crease operation time is 30 minutes (default ) or 120 minutes
(selected).
The [Anti-Crease] light should illuminate when the anti-crease function is selected. This function prevents the
laundry from creases. The laundry can be removed during the anti-crease phase. Except [Cool], [Refresh] and
[Baby Care], all the other programs have this function.
Instructions of the[My Cycle] function
Used to define and save your favorite programs that are used frequently.
1. Use the program selector to select the required program and other drying functions.
2. Press and hold the [Speed dry] button for 3 seconds until the beep and the required program has been
saved.
3. Turn the program selector to the [My Cycle] position, you can start your favorite programs. If you want to
change the [My Cycle] settings, repeat the steps 1 and 2.
Summary of Contents for WT8C90M
Page 28: ...tesla info...