Tesla WT8C90M, User Manual

Page: 12 / 28

12
ENG
Empty the water container
1. Hold and pull out the water container with two hands.
2. Tilt the water container, pour out the condensate water.
3. Insert the water container.
WARNING!
• Empty the water container after each use, the program will be
paused and the icon will light if the water container is full
during the drying process. After the container is emptied, the dryer
can be restarted by pressing [Start/Pause] button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Troubleshooting
Alarm Problem Alarm Reason Release
E30 Heating problem
Please contact your local service
center if the problem persists.
E32 Humidity sensor error
E33 Temperature sensor error
WARNING!
• Only authorized technicians can carry out repairs.
• Before you call service, please check if you have dealt with the fault yourself or if you have followed the
user instructions.
• A technician will charge you for advice, even during the warranty period.
Problem Solution
Display does not on
Check if the power supply works.
Check if the mains plug is inserted.
Check the selected programme .
Press the [On/Off] button.
is lighting
Empty water container.
If the light is still on, please call the service.
is lighting
Clean heat exchanger.
Clear lint filter.
Dryer does not start
Check the the door has closed.
Check the programme has set.
Check the start button has selected.
Degree of dryness was not reached or
drying time too long
Clean lint filter and heat exchanger.
Empty container.
Check drain hose.
Dryer installation place is too restricted.
Clean the moisture sensors.
Keep the Air inlet clean.
Use higher drying intensity level programme or Time program.
WARNING!
If you cannot deal with the fault by yourself and need help:
• Press the [On/Off] button.
• Pull out the mains plug and call the service.