DESCRIPTION OF AUDIO ERROR SIGNALS
Short tone
Cause
Solution
o
The front wheel or the
side brushes do not
work.
Check the front wheel and the side brushes and
clean them.
o o
Error of the bottom or
front sensor.
Clean the bottom sensors; lightly press the front
bumper. Check there is no jammed object.
o o o
The vacuum cleaner got
jammed.
Move the vacuum cleaner and continue cleaning.
If the problem still occurs, check whether the battery is fully charged if it is, turn the vacuum
cleaner off and on again with the main switch.
VACUUM CLEANER RESET
If the vacuum cleaner behaves in a non-standard way or you can not charge the battery properly
to its full capacity, connect it directly to the 230 V power supply for a long time, such as
overnight. The vacuum cleaner will be reset and the vacuum cleaner will be reset to original
factory values.
Turn off the vacuum cleaner on the main
switch to prevent it from moving. Then
connect the 230 V power adapter directly to
the vacuum cleaner. A full battery charge will
indicate that all LEDs on the top panel are on.
CHARGING
If you want charge up the vacuum cleaner, press the "
HOME
" (8) button on the remote control.
The vacuum cleaner will search for the charging station and automatically start charging the
battery. During charging, the blue LEDs on the vacuum cleaner blink, the LEDs light up when the
battery is fully charged.
If the battery status is low, the vacuum cleaner will automatically search for the charging station
and start charging. Keep the charging station connected to the mains continuously otherwise the
vacuum cleaner will not be able to find it.
BATTERY MAINTENANCE
We recommend to use the charging station for charging.
If you carry a robotic vacuum cleaner or will not use it for a long time, turn it off with the main
switch.
If you will not be using the device for a long time, remove the batteries from the remote control.
Quality battery cells that do not require formatting are used to power the vacuum cleaner.
