1
Top cover
5
Trash container door
2
Trash container
6
HEPA filter
3
Main switch (ON/OFF button)
7
HEPA filter frame
4
Primary filter
FIRST START - AUTOMATIC CLEANING
1.
This is the most common way of cleaning.
2.
Insert the batteries into the remote control, make sure the polarity is correct.
3.
Connect the charging station to an electrical outlet with a 230 V power adapter.
Ideal location of the charging base
There must be no obstacles within 2 meters in front and
1 meter on the sides from the charging station. The
charging station must be placed on a flat surface, we
also recommend to fix the station to the wall or floor
with a double-sided adhesive tape. Place the power cord
so it does not get entangle in the cleaning brushes of the
vacuum cleaner.
4.
Place the vacuum cleaner in the charging station and battery will start charging
automatically.
5.
The full charge of the batteries will be signaled by lighting up all the LEDs on the top panel.
6.
Turn on the main switch on the vacuum cleaner body (On/Off button).
7.
Before putting the vacuum cleaner into operation, prepare the room so there are no objects
on the floor that may prevent the vacuum cleaner to operate properly (bigger sheets of
paper, cables, stickers, small items, inappropriately placed carpet, etc.).
8.
Remove the chairs and other larger items so the vacuum cleaner can easily reach
inaccessible places.
9.
To put into operation, press the "
CLEAN
" button on the remote control or on the top of the
device.
10.
The vacuum cleaner starts cleaning automatically until the battery is almost empty, then the
vacuum cleaner automatically searches for the charging station and starts charging the
battery.
11.
To pause/stop the vacuum cleaner operation, press the "
CLEAN
" button again.
