CLEANING THE SENSORS, CONTACTS AND BRUSHES
Clean the charging contacts on the vacuum cleaner and on the charging station once a month
with a soft cloth. Clean the three sensors on the bottom of the vacuum cleaner in the same way,
marked points in the wheel (see figure).
Check at least once a week both side brushes together with the air intake and remove the worn
hair and other dirt. Remove the side cleaning brush from the vacuum cleaner by unscrewing the
crosshead screw.
FOLLOW US ON THE INTERNET
TECHNICAL SUPPORT
Need help with setup and operation of TESLA RoboStar T30?
Contact us:
http://www.tesla-electronics.eu/en/tesla-robostar-t30-detail
SERVICE AND SPARE PARTS
Warranty and post-warranty repairs, consumables and spare parts:
