Tesla NB301BXA, User Manual, Page: 8 / 84

8
SUGGESTED USES
CARE & MAINTENANCE
How to clean
PURPOSE SUGGESTED JAR TYPE OF FOOD
Chopping
0.5L
0.8L Nuts
Chocolate
Grating
0.5L
Cheese
Bread Crumbs
Mixing
0.5L
0.8L Batters
Dips
Sauces
0.5L
0.8L
Vinaigrettets
Salad Dressings
Simple Sauces
Frozen Blending
0.5L
0.8L
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies
0.5L
0.8L
CAUTION: Make Sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
NOTICE: Wait until the blender has cooled down
sufficiently before cleaning it.
CAUTION: DO NOT immerse the motor base into water
or any liquid, or place into a dishwasher.
1. Separate/remove all parts from each other.
2. Clean the motor base with a slightly damp cloth
and wipe dry
3. Place jars in the dishwasher. Place the lids and
attachments on the top rack.
Use caution when handling the blade assemblies
as the blades are very sharp.
4. Whenever possible, rinse parts immediately after
processing to make cleanup easier.
5. Store the product in a cool, dry place.
NOTE
You may also wash the jars by filling the jar to the Max
fill line with warm water and drop of dish washing
detergent, placing the blade assembly on the jar and
pulsing a few times. Do not fill the jar more than Max
fill line with water because it will overflow. Once clean,
remove the jar from the motor base. Rinse the jar,
attachment and lid under running water. Allow all the
parts to dry before storing.
Do not use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol, alcohol or acetone to
clean the appliance All detachable accessories can be
cleaned in dishwasher.
Tips:
Use a small brush(not included) to remove particles of
food lodged underneath the blades.
If some leftover particles dry onto the inside of the
jar, fill the cup about 2/3 full with warm water and
attach the blade subassembly. Place the jar and blade
subassembly onto the motor base and operate the
appliance for about 20-30 seconds to help loosen the
stuck ingredients. Repeat the above step but use clean
tap water. Empty blender and dry thoroughly.
CAUTION: Do not try attempt to remove blades from
the Blade subassembly for cleaning.