CROSSBAR INSTALLATION:
Ensure all four hooks are engaged, properly
aligned (step 5-6), and in the upright
position. Then, carefully place the front and
rear crossbars (4-5) over the pads.
Install the wingnut (11) and hand tighten
onto each of the towers.
10
11
Tighten the wingnuts with the hex wrench
XQWLOWKHWRZHULV´UPO\DI´[HGWRWKH
vehicle. We recommend tightening to 2.5-
1P7RFRQ´UPWKHWRZHULVSURSHUO\
installed, pull in all directions and ensure
there’s no movement. In order to lock the
system, the mark on the wingnut must align
ZLWKWKHPDUNRQWKHWRZHUVHH´J
*Overtightening may result in vehicle
damage.
12
fig. 1
06
